Miner's lamp charging charging rack shelf, miner charging rack price, miner charging rack manufacturers miner lamp charging stand is for the quality of the power supply for charging the battery. The charging rack can simultaneously charge 102 each miner final battery charging, the charging current of 0.1 amperes, will not overcharge. If the miner's battery is not in use, can be no less than the frame. Different degrees of each discharge lamp battery charge can always shelves, without disturbing each other. Zmjt11 miner charging rack includes only two major aircraft and silicon rectifier, rectifier section mounted on the bottom shelf of charge. Miner charging rack Conditions of Use: The charging rack mounted on the lamp housing with the following conditions: 1, ambient temperature does not exceed 40 ℃ and the Ministry of less than -30 ℃. 2, no more than 2000 meters above sea level. 3, the air relative humidity greater than 85% Ministry. 4, the light house located in Inoue, no severe vibration and shock. 5, ventilation, non-conductive dust exists. 6, no water or other liquids to enter. Miner charging rack parameters: Charging Stand Model: 102,846,054,363,220 rated DC voltage: 5 ± 0.1 volt AC input voltage: 220 V or 380 V, 50 Hz AC output DC voltage (Ann): 150A 125A 90A 80A 54A 48A 30A The maximum output power (watts): 1,020,840,600,540,360,220 200 models: KTSB-102 input parameters: 380 \ 220 output parameters: 0-7.5v charge current: 0-150 (A) Dimensions: 1860 * 1730 * 350 ( mm) of the products have been exported to many countries the United States, France, Canada, Indonesia, Russia, Vietnam, Australia, South Korea, Iran, etc., to get the client's praise. Due to production batches, depending on the model, the above picture is only for reference, the details can contact our sales staff to carry out specific verification. National unity free Sales Tel: 400-086-0537